# Bought a box solidrun model14x40300-d

**URL:** <https://community.solid-run.com/t/bought-a-box-solidrun-model14x40300-d/1010>\
**Category:** Uncategorized\
**Created:** [May 4, 2025, 5:15pm UTC](https://community.solid-run.com/t/bought-a-box-solidrun-model14x40300-d/1010 "2025-05-04T17:15:56Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![kronOSX](https://avatars.discourse-cdn.com/v4/letter/k/b77776/32.png) [@kronOSX](https://community.solid-run.com/u/kronOSX)\
**Post date:** [May 4, 2025, 5:15pm UTC](https://community.solid-run.com/t/bought-a-box-solidrun-model14x40300-d/1010/1 "2025-05-04T17:15:56Z")

</div>

The box powers on as i can see the red light in the digital audio port is red.I powered it back on and connected a usb to it to see if the usb light flickers) t osimulate a boot…nothing no lights.  
Connected hdmi and no display comes up.Did i buy a broken box or is there way to reset it or run a image from a flash drive or must it contain a sd card in with boot files.  
Where could i download this boot files and load it.I am lost as i dont know this product.  
Please can someone point me in the right direction t ojust let it at least boot tp some form of a screen.The power adaptoe has got 3amps at 5 volts.  
The other thing i notices is that some boxes display a red light in fromt.i do not have this red small light

---

<div class="post-metadata">

**Author:** ![jnettlet](https://dub1.discourse-cdn.com/flex005/user_avatar/community.solid-run.com/jnettlet/32/62_2.png) [@jnettlet](https://community.solid-run.com/u/jnettlet)\
**Post date:** [May 5, 2025, 4:25am UTC](https://community.solid-run.com/t/bought-a-box-solidrun-model14x40300-d/1010/2 "2025-05-05T04:25:46Z")

</div>

which firmware image are you using to boot it? That model needs the bootloader on the uSDHC card to boot.