# Boot from usb?

**URL:** <https://community.solid-run.com/t/boot-from-usb/359>\
**Category:** NXP LX2160\
**Created:** [June 20, 2022, 9:33am UTC](https://community.solid-run.com/t/boot-from-usb/359 "2022-06-20T09:33:28Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![joema](https://avatars.discourse-cdn.com/v4/letter/j/a9adbd/32.png) [@joema](https://community.solid-run.com/u/joema)\
**Post date:** [June 20, 2022, 9:33am UTC](https://community.solid-run.com/t/boot-from-usb/359/1 "2022-06-20T09:33:28Z")

</div>

Hi,

Does the LX2160A COM supports booting from USB?

Thanks!

---

<div class="post-metadata">

**Author:** ![PacMan](https://avatars.discourse-cdn.com/v4/letter/p/439d5e/32.png) [@PacMan](https://community.solid-run.com/u/PacMan)\
**Post date:** [June 23, 2022, 10:30am UTC](https://community.solid-run.com/t/boot-from-usb/359/2 "2022-06-23T10:30:36Z")

</div>

I think it’s possible by …  
Installing U-Boot in SPI-Flash OR  
Installing U-Boot on eMMC OR  
Installing U-Boot on SD-card  
… and then change the boot-order in U-Boot to your liking.  
`printenv boot_targets`  
By default only USB0 seem to be checked, so if you need to boot from a different USB-port, you’d have to extend the defautl U-Boot script.

---

<div class="post-metadata">

**Author:** ![joema](https://avatars.discourse-cdn.com/v4/letter/j/a9adbd/32.png) [@joema](https://community.solid-run.com/u/joema)\
**Post date:** [June 23, 2022, 2:17pm UTC](https://community.solid-run.com/t/boot-from-usb/359/3 "2022-06-23T14:17:20Z")

</div>

Thanks!