# BEDROCK V3000 - FreeBSD/OPNsense uart console configuration

**URL:** https://community.solid-run.com/t/bedrock-v3000-freebsd-opnsense-uart-console-configuration/688
**Category:** Uncategorized
**Created:** [July 25, 2023, 1:11pm UTC](https://community.solid-run.com/t/bedrock-v3000-freebsd-opnsense-uart-console-configuration/688 "2023-07-25T13:11:14Z")
**Posts on this page:** 1
**Page:** 1

<div class="post-metadata">

### Author: ![sbeaton](https://avatars.discourse-cdn.com/v4/letter/s/3bc359/32.png) [@sbeaton](https://community.solid-run.com/u/sbeaton)
#### Post date: [July 25, 2023, 1:11pm UTC](https://community.solid-run.com/t/bedrock-v3000-freebsd-opnsense-uart-console-configuration/688/1 "2023-07-25T13:11:14Z")

</div>

Managed to configure console access on first boot for OPNsense/FreeBSD and trying to figure out how to make it a permanent option in the OS

From initial boot I can set this in the boot loader and console works. Not sure if the parameter is 100% correct

OK set hw.uart.console=“mm:0xfedc9000,rs:2”  
OK boot