# Assistance Required: HummingBoard Ripple Development Kit

**URL:** <https://community.solid-run.com/t/assistance-required-hummingboard-ripple-development-kit/920>\
**Category:** NXP i.MX8M Plus\
**Created:** [November 1, 2024, 9:18am UTC](https://community.solid-run.com/t/assistance-required-hummingboard-ripple-development-kit/920 "2024-11-01T09:18:36Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![akh](https://avatars.discourse-cdn.com/v4/letter/a/3ec8ea/32.png) [@akh](https://community.solid-run.com/u/akh)\
**Post date:** [November 1, 2024, 9:18am UTC](https://community.solid-run.com/t/assistance-required-hummingboard-ripple-development-kit/920/1 "2024-11-01T09:18:36Z")

</div>

I recently purchased a HummingBoard Ripple development kit, and I’m experiencing some issues while following the official documentation. I’d appreciate further clarification on a few points:

1. Debian Image Download Issue  
I couldn’t locate the Debian image for my board as specified in the documentation. After searching, I found that the images were missing from the specified path. Is there a new location to download the ready-to-use Debian image, or is it currently unavailable? [images to test i.MX8M Mini is dead]

2. Docker Build Process Stopping  
I attempted to build the image manually using Docker , but the build process consistently stops at the same point. Could you advise if there is a step I might be missing?

Thank you for your time, and I’m looking forward to a quick resolution.

---

<div class="post-metadata">

**Author:** ![jnettlet](https://dub1.discourse-cdn.com/flex005/user_avatar/community.solid-run.com/jnettlet/32/62_2.png) [@jnettlet](https://community.solid-run.com/u/jnettlet)\
**Post date:** [November 3, 2024, 5:58am UTC](https://community.solid-run.com/t/assistance-required-hummingboard-ripple-development-kit/920/2 "2024-11-03T05:58:16Z")

</div>

We are currently changing the Debian image build process. They are being worked on.

Please post logs for the docker build failure and I will take a look.

---

<div class="post-metadata">

**Author:** ![akh](https://avatars.discourse-cdn.com/v4/letter/a/3ec8ea/32.png) [@akh](https://community.solid-run.com/u/akh)\
**Post date:** [November 5, 2024, 12:53pm UTC](https://community.solid-run.com/t/assistance-required-hummingboard-ripple-development-kit/920/3 "2024-11-05T12:53:32Z")

</div>

Thanks for the info @jnettlet. Is there a tentative date on which the Debian images would be available?

Attaching my docker build failure logs below. I was following this [GitHub post](https://github.com/SolidRun/imx8mm_build)

```auto
 #define CONFIG_CMD_MMC 1
 
  LD spl/lib/built-in.o
  LD spl/u-boot-spl
  OBJCOPY spl/u-boot-spl-nodtb.bin
  COPY spl/u-boot-spl.bin
  MKIMAGE SPL
  CFGCHK u-boot.cfg
'./arch/arm/dts/fsl-imx8mm-evk.dtb' -> '/work/build/imx-mkimage/iMX8M/fsl-imx8mm-evk.dtb'
'./arch/arm/dts/fsl-imx8mq-ddr4-arm2.dtb' -> '/work/build/imx-mkimage/iMX8M/fsl-imx8mq-ddr4-arm2.dtb'
'./arch/arm/dts/fsl-imx8mq-ddr3l-arm2.dtb' -> '/work/build/imx-mkimage/iMX8M/fsl-imx8mq-ddr3l-arm2.dtb'
'./arch/arm/dts/fsl-imx8mm-ddr4-val.dtb' -> '/work/build/imx-mkimage/iMX8M/fsl-imx8mm-ddr4-val.dtb'
'./arch/arm/dts/fsl-imx8mq-evk.dtb' -> '/work/build/imx-mkimage/iMX8M/fsl-imx8mq-evk.dtb'
'./arch/arm/dts/fsl-imx8mq-phanbell.dtb' -> '/work/build/imx-mkimage/iMX8M/fsl-imx8mq-phanbell.dtb'
'./arch/arm/dts/fsl-imx8mm-solidrun.dtb' -> '/work/build/imx-mkimage/iMX8M/fsl-imx8mm-solidrun.dtb'
'./arch/arm/dts/fsl-imx8mm-ddr4-evk.dtb' -> '/work/build/imx-mkimage/iMX8M/fsl-imx8mm-ddr4-evk.dtb'
'./arch/arm/dts/fsl-imx8mm-ddr3l-val.dtb' -> '/work/build/imx-mkimage/iMX8M/fsl-imx8mm-ddr3l-val.dtb'
cp: -r not specified; omitting directory './include/config/mkimage'
'./u-boot.bin' -> '/work/build/imx-mkimage/iMX8M/u-boot.bin'
'./tools/mkimage' -> '/work/build/imx-mkimage/iMX8M/mkimage'
'./u-boot-nodtb.bin' -> '/work/build/imx-mkimage/iMX8M/u-boot-nodtb.bin'
'./spl/u-boot-spl.bin' -> '/work/build/imx-mkimage/iMX8M/u-boot-spl.bin'
'./u-boot.dtb' -> '/work/build/imx-mkimage/iMX8M/u-boot.dtb'
'./dts/dt.dtb' -> '/work/build/imx-mkimage/iMX8M/dt.dtb'
'./dts/dt-spl.dtb' -> '/work/build/imx-mkimage/iMX8M/dt-spl.dtb'
cp: -r not specified; omitting directory './doc/imx/mkimage'
Makefile:2: *** missing separator. Stop.

```

Thanks for you assistance.  
Akhil

---

<div class="post-metadata">

**Author:** ![jnettlet](https://dub1.discourse-cdn.com/flex005/user_avatar/community.solid-run.com/jnettlet/32/62_2.png) [@jnettlet](https://community.solid-run.com/u/jnettlet)\
**Post date:** [November 6, 2024, 8:35am UTC](https://community.solid-run.com/t/assistance-required-hummingboard-ripple-development-kit/920/4 "2024-11-06T08:35:43Z")

</div>

oh that is very strange. I will test locally and get back to you.

---

<div class="post-metadata">

**Author:** ![akh](https://avatars.discourse-cdn.com/v4/letter/a/3ec8ea/32.png) [@akh](https://community.solid-run.com/u/akh)\
**Post date:** [November 7, 2024, 4:24am UTC](https://community.solid-run.com/t/assistance-required-hummingboard-ripple-development-kit/920/5 "2024-11-07T04:24:51Z")

</div>

Sounds good, thank you! Let me know if you need any additional info from my end.

---

<div class="post-metadata">

**Author:** ![akh](https://avatars.discourse-cdn.com/v4/letter/a/3ec8ea/32.png) [@akh](https://community.solid-run.com/u/akh)\
**Post date:** [November 15, 2024, 1:50pm UTC](https://community.solid-run.com/t/assistance-required-hummingboard-ripple-development-kit/920/6 "2024-11-15T13:50:21Z")

</div>

Hi @jnettlet, Did you get a chance to check? Thanks