# 100GbE NIC

**URL:** <https://community.solid-run.com/t/100gbe-nic/832>\
**Category:** NXP LX2160\
**Created:** [April 7, 2024, 10:03am UTC](https://community.solid-run.com/t/100gbe-nic/832 "2024-04-07T10:03:45Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![joema](https://avatars.discourse-cdn.com/v4/letter/j/a9adbd/32.png) [@joema](https://community.solid-run.com/u/joema)\
**Post date:** [April 7, 2024, 10:03am UTC](https://community.solid-run.com/t/100gbe-nic/832/1 "2024-04-07T10:03:45Z")

</div>

Hi,  
Can I test a 100GbE NIC using the ClearFrog board?  
Maybe with the QSFP port and something like the below?

ls-addni dpmac.1 # will add the NIC  
ifconfig eth1 up # link up  
ifconfig eth1 mtu 9000 # bigger packets for faster throughput

Thanks!