# Latest **URL:** https://community.solid-run.com/latest.md [Latest](https://community.solid-run.com/latest.md) · [Categories](https://community.solid-run.com/categories.md) · [Tags](https://community.solid-run.com/tags.md) --- ## [Support for Yocto 6.0](https://community.solid-run.com/t/support-for-yocto-6-0/1162)
**Author:** [@VPS\_Chris](https://community.solid-run.com/u/VPS_Chris)\ **Replies:** 0\ **Last updated:** [September 23, 2026, 10:00am UTC](https://community.solid-run.com/t/support-for-yocto-6-0/1162 "2026-09-23T10:00:40Z")
Is there a rough schedule when Yocto 6.0 will be supported for the imx8MPlus ? best regards Christian Ecker --- ## [Hummingboard2 imx6 w/emmc organelle swap](https://community.solid-run.com/t/hummingboard2-imx6-w-emmc-organelle-swap/1161)
**Author:** [@nofunlowlife](https://community.solid-run.com/u/nofunlowlife)\ **Replies:** 0\ **Last updated:** [September 18, 2026, 5:56am UTC](https://community.solid-run.com/t/hummingboard2-imx6-w-emmc-organelle-swap/1161 "2026-09-18T05:56:29Z")
The organelle uses imx6 and people have had luck swapping them from the cubox i4 quad core and I got a hummingboard2 gate when I put the som into organelle I get nothing at all. I added the .dtb file to the uEnv.txt and … --- ## [Debian 11 EOL](https://community.solid-run.com/t/debian-11-eol/1157)
**Author:** [@serverror](https://community.solid-run.com/u/serverror)\ **Replies:** 0\ **Last updated:** [September 8, 2026, 8:24pm UTC](https://community.solid-run.com/t/debian-11-eol/1157 "2026-09-08T20:24:26Z")
With Debian 11 officially EOL, it would be good to move your sample images away from it and onto Debian 13. Otherwise security, maintenance, and compatibility make it a poor image base. --- ## [ClearFog LX2162A Kit ClearFog not booting](https://community.solid-run.com/t/clearfog-lx2162a-kit-clearfog-not-booting/1105)
**Author:** [@moehme](https://community.solid-run.com/u/moehme)\ **Replies:** 1\ **Last updated:** [September 7, 2026, 2:17pm UTC](https://community.solid-run.com/t/clearfog-lx2162a-kit-clearfog-not-booting/1105 "2026-09-07T14:17:33Z")
Hello @ all, is there a way to do some kind of hardware reset. The led which seems to show she the status isn´t shinning. I changes the dip switches for booting from sd-card. There is also no output on the serial termi… --- ## [\[Solved\] My ClearFog CX LX2 won't boot (RAM not seated properly)](https://community.solid-run.com/t/solved-my-clearfog-cx-lx2-wont-boot-ram-not-seated-properly/1156)
**Author:** [@PacMan](https://community.solid-run.com/u/PacMan)\ **Replies:** 1\ **Last updated:** [September 7, 2026, 2:11pm UTC](https://community.solid-run.com/t/solved-my-clearfog-cx-lx2-wont-boot-ram-not-seated-properly/1156 "2026-09-07T14:11:48Z")
My LX2160 has been powered off for quite a while (as I have not had the equipment to build images). Edit: it’s board rev 2.1 (and it used to boot back in 2022). Yesterday I attempted to set it up again, writing an up-t… --- ## [LX2162A clearfog SFP+ optical transceivers not working](https://community.solid-run.com/t/lx2162a-clearfog-sfp-optical-transceivers-not-working/681)
**Author:** [@dstepanov](https://community.solid-run.com/u/dstepanov)\ **Replies:** 8\ **Last updated:** [August 27, 2026, 4:22pm UTC](https://community.solid-run.com/t/lx2162a-clearfog-sfp-optical-transceivers-not-working/681 "2026-08-27T16:22:20Z")
Hey! I’m using LX2162A SOM (rev 1.1) + LX2162A Clearfog board (rev.2). So these are the most recent HW revisions for this time. I connected and configured DAC cable to dpmac.5 and dpmac.6 (due to article https://solidr… --- ## [Modern-ish GPUs supported on this board?](https://community.solid-run.com/t/modern-ish-gpus-supported-on-this-board/1155)
**Author:** [@andy.nicholson](https://community.solid-run.com/u/andy.nicholson)\ **Replies:** 0\ **Last updated:** [August 25, 2026, 12:08am UTC](https://community.solid-run.com/t/modern-ish-gpus-supported-on-this-board/1155 "2026-08-25T00:08:55Z")
I’ve been running my machine on an AMD RX570 with the amdgpu driver for a few years now. Has anyone managed to run a more recent Radeon board on theirs? Considering trying to get a 9060 running. --- ## [Bedrock R7000 : access to the console](https://community.solid-run.com/t/bedrock-r7000-access-to-the-console/1153)
**Author:** [@patpro](https://community.solid-run.com/u/patpro)\ **Replies:** 0\ **Last updated:** [August 18, 2026, 2:38pm UTC](https://community.solid-run.com/t/bedrock-r7000-access-to-the-console/1153 "2026-08-18T14:38:09Z")
Hello, I was wondering: what would be the correct procedure to get access to the console of a running Bedrock R7000 via the mini USB-B port? I’ve plugged a proper USB cable between the R7000 and my Mac, and I can see t… --- ## [AMDGPU and SATA support for lx2160a\_build images? / Kernel/Mesa support timeline in 5+ years of using the LX2K as a Desktop](https://community.solid-run.com/t/amdgpu-and-sata-support-for-lx2160a-build-images-kernel-mesa-support-timeline-in-5-years-of-using-the-lx2k-as-a-desktop/1151)
**Author:** [@Jarico](https://community.solid-run.com/u/Jarico)\ **Replies:** 0\ **Last updated:** [August 14, 2026, 5:12pm UTC](https://community.solid-run.com/t/amdgpu-and-sata-support-for-lx2160a-build-images-kernel-mesa-support-timeline-in-5-years-of-using-the-lx2k-as-a-desktop/1151 "2026-08-14T17:12:58Z")
Hi all, TLDR: I can’t use the SolidRun HoneyComb LX2K as a desktop system with newer kernels due to patches that became incompatible Below are some questions: Do the lx2160a\_build images support video-out via DisplayP… --- ## [HoneyComb SATA performance issues](https://community.solid-run.com/t/honeycomb-sata-performance-issues/1103)
**Author:** [@ed.roach](https://community.solid-run.com/u/ed.roach)\ **Replies:** 1\ **Last updated:** [July 17, 2026, 2:00pm UTC](https://community.solid-run.com/t/honeycomb-sata-performance-issues/1103 "2026-07-17T14:00:29Z")
I’ve run into the same issue as this thread on two LX2160A HoneyComb boards, but only specifically on SATA ports SATA0 and SATA2 (U32) — the other two function just fine and reliably. With certain SATA drives, SATA0 is p… --- ## [Management console on LX2162A](https://community.solid-run.com/t/management-console-on-lx2162a/662)
**Author:** [@dstepanov](https://community.solid-run.com/u/dstepanov)\ **Replies:** 3\ **Last updated:** [June 9, 2026, 7:50pm UTC](https://community.solid-run.com/t/management-console-on-lx2162a/662 "2026-06-09T19:50:02Z")
Hello! I’m using ClearFog LX2162A. Is it possible to organize some kind of remote management (at least power on/off and reset of LX2162A SOM) without using external RunBMC module? Due to schematics Clearfog LX2162A con… --- ## [IMX6DL rev 2.0 uart problem](https://community.solid-run.com/t/imx6dl-rev-2-0-uart-problem/1137)
**Author:** [@mario\_manissero](https://community.solid-run.com/u/mario_manissero)\ **Replies:** 1\ **Last updated:** [May 26, 2026, 5:16pm UTC](https://community.solid-run.com/t/imx6dl-rev-2-0-uart-problem/1137 "2026-05-26T17:16:38Z")
Dear all I have a unknow behaviour on som imx6 dual lite rev 2.0 SRMX6DLW00D01GE008V20A0 related to the uart1\_tx\_data port. On my project that uart is connected to a gps for communication at 3.3V. The problem is that … --- ## [SolidRun ClearFog CN9130 - Openwrt Boot Error WAN and LAN Ports are not Detected "mvpp2 f2000000.ethernet eth2: could not attach PHY (-22)"](https://community.solid-run.com/t/solidrun-clearfog-cn9130-openwrt-boot-error-wan-and-lan-ports-are-not-detected-mvpp2-f2000000-ethernet-eth2-could-not-attach-phy-22/1138)
**Author:** [@pavankumarv-kitforge](https://community.solid-run.com/u/pavankumarv-kitforge)\ **Replies:** 1\ **Last updated:** [May 26, 2026, 5:14pm UTC](https://community.solid-run.com/t/solidrun-clearfog-cn9130-openwrt-boot-error-wan-and-lan-ports-are-not-detected-mvpp2-f2000000-ethernet-eth2-could-not-attach-phy-22/1138 "2026-05-26T17:14:39Z")
Hey Team, I have a SolidRun ClearFog CN9130 hardware. I am trying to run openwrt on the hardware; however, I have some roadblocks. When the Openwrt OS is booting I see the WAN port is not detected and throwing error. … --- ## [Looking for schematics of particular version of ClearFog CX2 LX2160A Dev Board](https://community.solid-run.com/t/looking-for-schematics-of-particular-version-of-clearfog-cx2-lx2160a-dev-board/1129)
**Author:** [@alning](https://community.solid-run.com/u/alning)\ **Replies:** 1\ **Last updated:** [May 7, 2026, 8:06am UTC](https://community.solid-run.com/t/looking-for-schematics-of-particular-version-of-clearfog-cx2-lx2160a-dev-board/1129 "2026-05-07T08:06:59Z")
Hi, I’d be appreciate if you provide me with schematics corresponding to revision of my deviceClearFog board: COM - LX2160A CEX7 rev.1.7 Carrier - ClearFog ITX rev 1.2 Or just list of changes have been made since tha… --- ## [Upgrade Debian 12 -\> Debian 13 partial failure (kernel 6.12+ won't boot)](https://community.solid-run.com/t/upgrade-debian-12-debian-13-partial-failure-kernel-6-12-wont-boot/1058)
**Author:** [@AreYouLoco](https://community.solid-run.com/u/AreYouLoco)\ **Replies:** 8\ **Last updated:** [May 5, 2026, 2:01pm UTC](https://community.solid-run.com/t/upgrade-debian-12-debian-13-partial-failure-kernel-6-12-wont-boot/1058 "2026-05-05T14:01:37Z")
Hi, I just upgraded system on my lx2k. Was suspecting problems. And while the system upgrade went fine. It wont boot on newer kernels. Stock kernel on Deb12 6.1.0-37-arm64 (Debian 12.11) with iommu workaround is still … --- ## [HummingBoard Hailo-15 AIOT - MIPI DSI Screen Not working](https://community.solid-run.com/t/hummingboard-hailo-15-aiot-mipi-dsi-screen-not-working/1126)
**Author:** [@kp24](https://community.solid-run.com/u/kp24)\ **Replies:** 4\ **Last updated:** [April 14, 2026, 8:01am UTC](https://community.solid-run.com/t/hummingboard-hailo-15-aiot-mipi-dsi-screen-not-working/1126 "2026-04-14T08:01:46Z")
Hi, I have the Hailo 15 EVB kit with the MIPI-DSI display. The board is working fine. But the display that has come with it does not show anything, after successful boot process the display’s backlight is ON but nothin… --- ## [Hailo-15H application\_input\_stream silently capped at 1920×1080 — is this a hardware limit?](https://community.solid-run.com/t/hailo-15h-application-input-stream-silently-capped-at-1920x1080-is-this-a-hardware-limit/1127)
**Author:** [@maverickz1989](https://community.solid-run.com/u/maverickz1989)\ **Replies:** 1\ **Last updated:** [April 14, 2026, 7:18am UTC](https://community.solid-run.com/t/hailo-15h-application-input-stream-silently-capped-at-1920x1080-is-this-a-hardware-limit/1127 "2026-04-14T07:18:17Z")
Platform: Hailo-15H SBC 2.x, Hailo Media Library v1.7.0 (toolchain v1.10.1) Connectivity: Using Ethernet connection between my laptop and the board Sensor: IMX678, capturing at 3840×2160@30fps Issue: When configuring… --- ## [Fw\_printenv configuration file for imx8mp-sr-som](https://community.solid-run.com/t/fw-printenv-configuration-file-for-imx8mp-sr-som/1116)
**Author:** [@Christophe](https://community.solid-run.com/u/Christophe)\ **Replies:** 2\ **Last updated:** [April 13, 2026, 12:20pm UTC](https://community.solid-run.com/t/fw-printenv-configuration-file-for-imx8mp-sr-som/1116 "2026-04-13T12:20:40Z")
Hello, I’m configuring Rauc for an HummingBoard Pro boad (i.MX8M Plus) under Yocto (scarthgap). I’m currently facing an issue with fw\_printenv which complains with the following message: root@imx8mp-sr-som:~# fw\_print… --- ## [Hailo Hummingboard bricked after SWUpdate](https://community.solid-run.com/t/hailo-hummingboard-bricked-after-swupdate/1123)
**Author:** [@santiagobarros](https://community.solid-run.com/u/santiagobarros)\ **Replies:** 2\ **Last updated:** [April 7, 2026, 10:18am UTC](https://community.solid-run.com/t/hailo-hummingboard-bricked-after-swupdate/1123 "2026-04-07T10:18:57Z")
\# Custom Yocto Build Breaks Secure Boot — How to Deploy Custom Firmware? \*\*Board:\*\* SolidRun HummingBoard IIoT with Hailo-15 SOM (Rev 1.1) \*\*BSP:\*\* meta-solidrun-arm-hailo @ d8ef539 (kirkstone branch) \*\*SCU Firmware:\*… --- ## [Yocto project](https://community.solid-run.com/t/yocto-project/1121)
**Author:** [@ajin](https://community.solid-run.com/u/ajin)\ **Replies:** 1\ **Last updated:** [April 7, 2026, 10:15am UTC](https://community.solid-run.com/t/yocto-project/1121 "2026-04-07T10:15:32Z")
Hello Solidrun, I am using Hailo15H Hummingboard IOT. I want to use meta-hailo-soc 1.10.1 version. But the current version of that available in solidrun repository (meta-solidrun-arm-hailo) is 1.7.0. Can you provide pr… --- ## [Trouble finding Humminboard pin layout](https://community.solid-run.com/t/trouble-finding-humminboard-pin-layout/1124)
**Author:** [@Johannes](https://community.solid-run.com/u/Johannes)\ **Replies:** 2\ **Last updated:** [April 7, 2026, 9:11am UTC](https://community.solid-run.com/t/trouble-finding-humminboard-pin-layout/1124 "2026-04-07T09:11:04Z")
Hello, I have a Hummingboard 2 (Edge), with GPIO pin layout like 4 \* 3 + 4 \* 6. I can’t seem to find a picture or something with the pin layout, the best thing i found was This: https://solidrun.atlassian.net/wiki/sp… --- ## [V3000 - No keyboard control through console](https://community.solid-run.com/t/v3000-no-keyboard-control-through-console/1119)
**Author:** [@WalkerAdi](https://community.solid-run.com/u/WalkerAdi)\ **Replies:** 2\ **Last updated:** [March 26, 2026, 1:34pm UTC](https://community.solid-run.com/t/v3000-no-keyboard-control-through-console/1119 "2026-03-26T13:34:09Z")
Hello - I am struggling to get Ubuntu server to function through console. I am following this guide: Everything functions as expected until after the grub options have been edited. The boot proceeds as expected, when… --- ## [M10 gnss no fix](https://community.solid-run.com/t/m10-gnss-no-fix/1118)
**Author:** [@dylan](https://community.solid-run.com/u/dylan)\ **Replies:** 2\ **Last updated:** [March 25, 2026, 12:01pm UTC](https://community.solid-run.com/t/m10-gnss-no-fix/1118 "2026-03-25T12:01:31Z")
Hi there, I seem to be unable to get a fix on the ublox m10 gnss. The antenna is connected to J34 on the Hummingboard carrier. I have used cgps to check the fix. I have the v2x evaluation kit setup. Here is some outpu… --- ## [Post-install - Unable to open an initial console](https://community.solid-run.com/t/post-install-unable-to-open-an-initial-console/1111)
**Author:** [@a9121431](https://community.solid-run.com/u/a9121431)\ **Replies:** 3\ **Last updated:** [March 18, 2026, 7:18am UTC](https://community.solid-run.com/t/post-install-unable-to-open-an-initial-console/1111 "2026-03-18T07:18:23Z")
After successfully installed PureDebian SDK 13.2, kernel boot stuck at Starting kernel … \[ 0.000000\] Booting Linux on physical CPU 0x0000000000 \[0x410fd083\] \[ 0.000000\] Linux version 6.12.57+deb13-arm64 (debian-… --- ## [V2x documentation](https://community.solid-run.com/t/v2x-documentation/1117)
**Author:** [@dylan](https://community.solid-run.com/u/dylan)\ **Replies:** 1\ **Last updated:** [March 17, 2026, 6:08am UTC](https://community.solid-run.com/t/v2x-documentation/1117 "2026-03-17T06:08:25Z")
Hi there, I assume this is not the right place for this but I cannot seem to get a hold of SolidRun through the +972 number or via technical support Contact SolidRun: Embedded Computing Support. I have purchased x2 htt… --- ## [Automate addition of FDTOVERLAYS to /boot/extlinux/extlinux.conf](https://community.solid-run.com/t/automate-addition-of-fdtoverlays-to-boot-extlinux-extlinux-conf/1112)
**Author:** [@Christophe](https://community.solid-run.com/u/Christophe)\ **Replies:** 2\ **Last updated:** [March 16, 2026, 9:32am UTC](https://community.solid-run.com/t/automate-addition-of-fdtoverlays-to-boot-extlinux-extlinux-conf/1112 "2026-03-16T09:32:10Z")
Hello, I’m working on a HummingBoard Pro boad (i.MX8M Plus) with Basel Cameras on the carrier board port. To declare the necessary DTB, I have to add the following line to /boot/extlinux/extlinux.conf: FDTOVERLAYS… --- ## [ClearFog CX2 LX2160A Dev Board - Write to SRKH Registers in RSP using JTAG](https://community.solid-run.com/t/clearfog-cx2-lx2160a-dev-board-write-to-srkh-registers-in-rsp-using-jtag/1115)
**Author:** [@jhammerberg](https://community.solid-run.com/u/jhammerberg)\ **Replies:** 0\ **Last updated:** [March 11, 2026, 5:08pm UTC](https://community.solid-run.com/t/clearfog-cx2-lx2160a-dev-board-write-to-srkh-registers-in-rsp-using-jtag/1115 "2026-03-11T17:08:17Z")
Hello, I’ve been trying to enable and demo secure boot on the ClearFog CX2 Dev Board for the LX2160A. I’ve made a software image with Yocto which I believe has secure boot enabled, although it’s hard to tell given that … --- ## [Issue Booting Yocto Image on NXP LX2160A ClearFog (SolidRun) Board](https://community.solid-run.com/t/issue-booting-yocto-image-on-nxp-lx2160a-clearfog-solidrun-board/1108)
**Author:** [@Suresh\_m](https://community.solid-run.com/u/Suresh_m)\ **Replies:** 1\ **Last updated:** [March 11, 2026, 9:18am UTC](https://community.solid-run.com/t/issue-booting-yocto-image-on-nxp-lx2160a-clearfog-solidrun-board/1108 "2026-03-11T09:18:49Z")
Hi, We are planning to bring up a Yocto image on the NXP LX2160A ClearFog board from SolidRun. We downloaded the default image from the SolidRun website and used the following image: fsl-image-networking-full-lx2160a-… --- ## [Enabling single-DIMM operations in the secondary DIMM slot](https://community.solid-run.com/t/enabling-single-dimm-operations-in-the-secondary-dimm-slot/1068)
**Author:** [@romameie](https://community.solid-run.com/u/romameie)\ **Replies:** 2\ **Last updated:** [March 11, 2026, 9:17am UTC](https://community.solid-run.com/t/enabling-single-dimm-operations-in-the-secondary-dimm-slot/1068 "2026-03-11T09:17:14Z")
I am in possession of a LX2160A CEx7 CoM with a broken primary DIMM slot. Firmware images fail to boot with a DIMM in the secondary DIMM slot, because there is a bug after disabling the first DDR controller in the upstr… --- ## [Custom kickstart file (.wks)](https://community.solid-run.com/t/custom-kickstart-file-wks/1114)
**Author:** [@Christophe](https://community.solid-run.com/u/Christophe)\ **Replies:** 3\ **Last updated:** [March 10, 2026, 2:06pm UTC](https://community.solid-run.com/t/custom-kickstart-file-wks/1114 "2026-03-10T14:06:34Z")
Hello, I would like to customize my .wks file. For example to add a /data partition separated from my rootfs, so that device specific data remains after a rootfs update. This works fine when I edit directly meta-solidr… [Next page](https://community.solid-run.com/latest.md?page=1)