# NXP LX2160 **URL:** https://community.solid-run.com/c/nxp-lx2160/6.md?page=5 [Latest](https://community.solid-run.com/latest.md) · [Categories](https://community.solid-run.com/categories.md) · [Tags](https://community.solid-run.com/tags.md) **Page:** 6 --- ## [Reconfigure and rebuild busybox](https://community.solid-run.com/t/reconfigure-and-rebuild-busybox/520)
**Author:** [@jozhangt](https://community.solid-run.com/u/jozhangt)\ **Replies:** 1\ **Last updated:** [November 17, 2022, 3:56am UTC](https://community.solid-run.com/t/reconfigure-and-rebuild-busybox/520 "2022-11-17T03:56:33Z")
We have the build by following the procedure in the link below Load the image to the board and Linux comes up OK, but there is no vi in the image. We go to directory and try to reconfigure the busybox: ~/work/lx2160a… --- ## [How to add vi into the Linux build](https://community.solid-run.com/t/how-to-add-vi-into-the-linux-build/518)
**Author:** [@jozhangt](https://community.solid-run.com/u/jozhangt)\ **Replies:** 3\ **Last updated:** [November 15, 2022, 2:29pm UTC](https://community.solid-run.com/t/how-to-add-vi-into-the-linux-build/518 "2022-11-15T14:29:40Z")
I have Linux boot OK on the board from my image. How I can have utilities such as vi in my Linux build? Thanks! --- ## [Hardware clock setting not working](https://community.solid-run.com/t/hardware-clock-setting-not-working/516)
**Author:** [@jmazel](https://community.solid-run.com/u/jmazel)\ **Replies:** 0\ **Last updated:** [November 9, 2022, 5:15pm UTC](https://community.solid-run.com/t/hardware-clock-setting-not-working/516 "2022-11-09T17:15:28Z")
As specified in the documentation, I use “ntpdate http://pool.ntp.org” and then “hwclock -w” to set the OS and hardware clock. However, after every reboot the clock is set back in time. I checked that the battery volta… --- ## [Where is the Device Tree in the source tree?](https://community.solid-run.com/t/where-is-the-device-tree-in-the-source-tree/515)
**Author:** [@jozhangt](https://community.solid-run.com/u/jozhangt)\ **Replies:** 1\ **Last updated:** [November 9, 2022, 8:57am UTC](https://community.solid-run.com/t/where-is-the-device-tree-in-the-source-tree/515 "2022-11-09T08:57:50Z")
Just did a build following the steps in GitHub - SolidRun/lx2160a\_build: Scripts to build basic images for LX2160A COM express type 7 modules Can anyone tell me where I can find the device tree for this board? Thanks! --- ## [Issues compiling the images with glibc 2.35](https://community.solid-run.com/t/issues-compiling-the-images-with-glibc-2-35/514)
**Author:** [@benoit.donnette](https://community.solid-run.com/u/benoit.donnette)\ **Replies:** 1\ **Last updated:** [November 4, 2022, 1:32pm UTC](https://community.solid-run.com/t/issues-compiling-the-images-with-glibc-2-35/514 "2022-11-04T13:32:40Z")
Hello, I’m having a new issue : from the git https://github.com/SolidRun/lx2160a\_build, using docker fails because I’m on a platform using glibc 2.35. The message is: Checking all required tools are installed Building … --- ## [What is the "nominal" expected Clearfog SERDES configuration?](https://community.solid-run.com/t/what-is-the-nominal-expected-clearfog-serdes-configuration/513)
**Author:** [@benoit.donnette](https://community.solid-run.com/u/benoit.donnette)\ **Replies:** 1\ **Last updated:** [November 3, 2022, 6:25am UTC](https://community.solid-run.com/t/what-is-the-nominal-expected-clearfog-serdes-configuration/513 "2022-11-03T06:25:08Z")
Well I couldn’t find the SERDES config for 4x10g operation on the SFP+ cages plus 100g on the QSFP28 cage, is there any SERDES config for that, or did I miss a doc ? Thanks in advance. --- ## [Using lx2160a\_build repo, how can I build a particular kernel?](https://community.solid-run.com/t/using-lx2160a-build-repo-how-can-i-build-a-particular-kernel/500)
**Author:** [@pkufeldt](https://community.solid-run.com/u/pkufeldt)\ **Replies:** 0\ **Last updated:** [October 21, 2022, 12:51am UTC](https://community.solid-run.com/t/using-lx2160a-build-repo-how-can-i-build-a-particular-kernel/500 "2022-10-21T00:51:04Z")
Need the source and would like to rebuild the kernel I am currently booting which is: 5.4.47-00007-g8edfda9bc How do I specify to runme.sh to build this kernel? --- ## [Problem with Debian Bullseye installation from built image](https://community.solid-run.com/t/problem-with-debian-bullseye-installation-from-built-image/475)
**Author:** [@jmazel](https://community.solid-run.com/u/jmazel)\ **Replies:** 1\ **Last updated:** [October 3, 2022, 9:23am UTC](https://community.solid-run.com/t/problem-with-debian-bullseye-installation-from-built-image/475 "2022-10-03T09:23:01Z")
Hello I used the GitHub - SolidRun/lx2160a\_build: Scripts to build basic images for LX2160A COM express type 7 modules repo to build a Debian-based image. I replaced ${DISTRO:=ubuntu} by ${DISTRO:=debian} and built the… --- ## [Lspci: Unable to load libkmod resources: error -12](https://community.solid-run.com/t/lspci-unable-to-load-libkmod-resources-error-12/471)
**Author:** [@vader](https://community.solid-run.com/u/vader)\ **Replies:** 9\ **Last updated:** [September 30, 2022, 1:13am UTC](https://community.solid-run.com/t/lspci-unable-to-load-libkmod-resources-error-12/471 "2022-09-30T01:13:05Z")
I build image from lx2160a\_build with DPDK，and deploy to LX2160A. But when I run this command, dpdk-devbind.py -s give me some error meeags,like those, lspci: Unable to load libkmod resources: error -12 lspci: Unable … --- ## [NVME setup problem for lx2160a](https://community.solid-run.com/t/nvme-setup-problem-for-lx2160a/464)
**Author:** [@lx2160a\_newbie](https://community.solid-run.com/u/lx2160a_newbie)\ **Replies:** 8\ **Last updated:** [September 28, 2022, 5:07pm UTC](https://community.solid-run.com/t/nvme-setup-problem-for-lx2160a/464 "2022-09-28T17:07:38Z")
I am having trouble setting up the nvme drive when I try to follow \[https://solidrun.atlassian.net/wiki/spaces/developer/pages/197494345/LX2160A+Software. I did interrupt the auto boot and was able to follow the steps i… --- ## [Ubuntu2004 compile linux perf failed！](https://community.solid-run.com/t/ubuntu2004-compile-linux-perf-failed/424)
**Author:** [@vader](https://community.solid-run.com/u/vader)\ **Replies:** 3\ **Last updated:** [September 22, 2022, 1:31am UTC](https://community.solid-run.com/t/ubuntu2004-compile-linux-perf-failed/424 "2022-09-22T01:31:11Z")
I compile linux kernel on ubuntu2004, using the following command: flex-builder -c linux and then , flex-builder -i mkboot but get following errors: --- ## [Rootfs location in lx2160a\_build](https://community.solid-run.com/t/rootfs-location-in-lx2160a-build/346)
**Author:** [@joes](https://community.solid-run.com/u/joes)\ **Replies:** 7\ **Last updated:** [September 13, 2022, 3:06pm UTC](https://community.solid-run.com/t/rootfs-location-in-lx2160a-build/346 "2022-09-13T15:06:09Z")
I’d like to add some startup options for systemd to my build using the solidrun supplied kernel repository, lx2160a\_build. Could you please tell me how to add files to merge into rootfs at build time? I can’t seem to l… --- ## [LX2160A second RCW source](https://community.solid-run.com/t/lx2160a-second-rcw-source/431)
**Author:** [@dstepanov](https://community.solid-run.com/u/dstepanov)\ **Replies:** 4\ **Last updated:** [September 9, 2022, 8:10am UTC](https://community.solid-run.com/t/lx2160a-second-rcw-source/431 "2022-09-09T08:10:52Z")
Hello! I’m using LX2160A clearfog development board and trying to implement reliable boot in case of failure of one of the boot sources (eMMC/SD/SPI). LX2160A Reference Manual (Rev. 0RH, 07/2020) in detailed Power-On re… --- ## [What is the ClearFog's acheiveable net badwidth?](https://community.solid-run.com/t/what-is-the-clearfogs-acheiveable-net-badwidth/457)
**Author:** [@benoit.donnette](https://community.solid-run.com/u/benoit.donnette)\ **Replies:** 4\ **Last updated:** [September 7, 2022, 7:56am UTC](https://community.solid-run.com/t/what-is-the-clearfogs-acheiveable-net-badwidth/457 "2022-09-07T07:56:26Z")
Hi, I wanted to know how much BW was acheiveble if I were to use a ClearFog LX2160A as a network equipment changing just the IP header (actually it would be a IPv4\<–\>IPv6 transform) ? --- ## [COM Mechanical Footprint](https://community.solid-run.com/t/com-mechanical-footprint/450)
**Author:** [@womble](https://community.solid-run.com/u/womble)\ **Replies:** 2\ **Last updated:** [September 2, 2022, 11:06am UTC](https://community.solid-run.com/t/com-mechanical-footprint/450 "2022-09-02T11:06:40Z")
Hello, We’re designing a custom carreir board for the LX2160A COM and I’m looking for a mechanical drawing of the footprint including the connector locations. There is some mechanical design information including the mo… --- ## [LX2162A RCW source config pins](https://community.solid-run.com/t/lx2162a-rcw-source-config-pins/448)
**Author:** [@dstepanov](https://community.solid-run.com/u/dstepanov)\ **Replies:** 1\ **Last updated:** [August 29, 2022, 12:42pm UTC](https://community.solid-run.com/t/lx2162a-rcw-source-config-pins/448 "2022-08-29T12:42:40Z")
I’m planning to use LX2162A SOM and trying to understand possible boot source options. Due to simplified schematics (https://solidrun.atlassian.net/wiki/spaces/developer/pages/197494140/LX2162A+SOM+Hardware+User+Manual#S… --- ## [Proper RCW/PBI boot sequence](https://community.solid-run.com/t/proper-rcw-pbi-boot-sequence/432)
**Author:** [@dstepanov](https://community.solid-run.com/u/dstepanov)\ **Replies:** 2\ **Last updated:** [August 21, 2022, 1:06pm UTC](https://community.solid-run.com/t/proper-rcw-pbi-boot-sequence/432 "2022-08-21T13:06:40Z")
LX2160A Reference Manual (Rev. 0RH, 07/2020) in detailed Power-On reset description (4.9.5, table 11) states that initially Service processor loads RCW (stage 13) and only after that loads and executes PBI commands (stag… --- ## [PCIe bifurication on the HoneyComb LX2](https://community.solid-run.com/t/pcie-bifurication-on-the-honeycomb-lx2/428)
**Author:** [@LukeS](https://community.solid-run.com/u/LukeS)\ **Replies:** 2\ **Last updated:** [August 17, 2022, 9:27am UTC](https://community.solid-run.com/t/pcie-bifurication-on-the-honeycomb-lx2/428 "2022-08-17T09:27:03Z")
Hi I noticed that there’s an option for PCIe bifurication in the uefi firmware which isn’t built by default. Has anyone tried this? I’d like to convert the x8 PCIe slot into two x4 slots for some additional NVMe drives… --- ## [DPSW on CEX7](https://community.solid-run.com/t/dpsw-on-cex7/407)
**Author:** [@Lechtchinski.Dmitri](https://community.solid-run.com/u/Lechtchinski.Dmitri)\ **Replies:** 6\ **Last updated:** [August 17, 2022, 4:12am UTC](https://community.solid-run.com/t/dpsw-on-cex7/407 "2022-08-17T04:12:05Z")
Hi, I’m trying a simple setup with a DPSW on CEX7 board. I have a network cable connected to a host PC via MAC17. On boot, I perform the following: ifconfig eth0 192.168.0.100 netmask 255.255.255.0 After this I have… --- ## [Linux hangs on NVMe detection](https://community.solid-run.com/t/linux-hangs-on-nvme-detection/427)
**Author:** [@elahav](https://community.solid-run.com/u/elahav)\ **Replies:** 5\ **Last updated:** [August 16, 2022, 12:40pm UTC](https://community.solid-run.com/t/linux-hangs-on-nvme-detection/427 "2022-08-16T12:40:16Z")
Trying to switch back to Linux for a quick test, the board doesn’t complete the kernel boot sequence: \[ 4.842384\] No soundcards found. … --- ## [HoneyComb LX2 TPM2 Module](https://community.solid-run.com/t/honeycomb-lx2-tpm2-module/425)
**Author:** [@preisschild](https://community.solid-run.com/u/preisschild)\ **Replies:** 3\ **Last updated:** [August 15, 2022, 9:31am UTC](https://community.solid-run.com/t/honeycomb-lx2-tpm2-module/425 "2022-08-15T09:31:24Z")
Hi I want to use the LX2 as a storage server in my homelab because it looks like a really cool low power, high connectivity board, but I still have a question regarding full disk encryption with a TPM/HSM module to save… --- ## [FDT and RAM information](https://community.solid-run.com/t/fdt-and-ram-information/413)
**Author:** [@elahav](https://community.solid-run.com/u/elahav)\ **Replies:** 2\ **Last updated:** [August 2, 2022, 11:59am UTC](https://community.solid-run.com/t/fdt-and-ram-information/413 "2022-08-02T11:59:37Z")
I am still struggling with passing the patched FDT from u-boot with the updated RAM information to the OS. I have the board working just fine with the hard-coded values, but it won’t work for someone else who has a diffe… --- ## [Sensors terminal output](https://community.solid-run.com/t/sensors-terminal-output/119)
**Author:** [@samurai](https://community.solid-run.com/u/samurai)\ **Replies:** 3\ **Last updated:** [July 23, 2021, 9:25am UTC](https://community.solid-run.com/t/sensors-terminal-output/119 "2021-07-23T09:25:11Z")
I am trying to measure power on ClearFog CX LX2 (paired with a Cavium Thunder X2). By using the “sensors” command on linux, I get the attached output. I am assuming that pout is the power output of the device, howeve… --- ## [Clearfog CX LX2 firmware](https://community.solid-run.com/t/clearfog-cx-lx2-firmware/401)
**Author:** [@samurai](https://community.solid-run.com/u/samurai)\ **Replies:** 1\ **Last updated:** [July 25, 2022, 11:14am UTC](https://community.solid-run.com/t/clearfog-cx-lx2-firmware/401 "2022-07-25T11:14:00Z")
In order to utilize the management USB on the device, I had requested and received the required firmware. It worked as intended(by issuing pl/ph via ACM1 - connected to COM express SER0 console) however, stopped reading… --- ## [U-boot MAC mismatch](https://community.solid-run.com/t/u-boot-mac-mismatch/406)
**Author:** [@elahav](https://community.solid-run.com/u/elahav)\ **Replies:** 5\ **Last updated:** [July 26, 2022, 11:17am UTC](https://community.solid-run.com/t/u-boot-mac-mismatch/406 "2022-07-26T11:17:31Z")
Hello, I have an Intel NIC attached to the PCI slot. u-boot is complaining about a MAC mismatch on every boot. Normally I wouldn’t care, but it is slowing down boot time by a couple of seconds. There appear to be vario… --- ## [SFP ethernet?](https://community.solid-run.com/t/sfp-ethernet/375)
**Author:** [@the\_n00b](https://community.solid-run.com/u/the_n00b)\ **Replies:** 6\ **Last updated:** [July 23, 2022, 6:15am UTC](https://community.solid-run.com/t/sfp-ethernet/375 "2022-07-23T06:15:06Z")
Hi, this is my first experience with SFP so sorry for what are probably very basic questions. I have a 10Gtek 1000Base-T SFP module and am trying to use another RJ45 port. UEFI shell does not detect it. Is that expected… --- ## [Flash Ubuntu image to SATA drive](https://community.solid-run.com/t/flash-ubuntu-image-to-sata-drive/396)
**Author:** [@joes](https://community.solid-run.com/u/joes)\ **Replies:** 2\ **Last updated:** [July 22, 2022, 11:52pm UTC](https://community.solid-run.com/t/flash-ubuntu-image-to-sata-drive/396 "2022-07-22T23:52:45Z")
I would like to flash an image based on the lx2160a\_build distribution to a SATA drive. I’m a bit confused by the documentation and I’m wondering if I’m not understanding the instructions. From the document: https://… --- ## [Lx2160a cex7 jtag](https://community.solid-run.com/t/lx2160a-cex7-jtag/393)
**Author:** [@heikkik](https://community.solid-run.com/u/heikkik)\ **Replies:** 1\ **Last updated:** [July 19, 2022, 5:07am UTC](https://community.solid-run.com/t/lx2160a-cex7-jtag/393 "2022-07-19T05:07:36Z")
I have LX2160A CEX7 rev 2.1 + ClearFog. There is no schema available for that board version. Version 1.6 schema shows that JTAG is connected to test points: TP1, TP2, TP3, TP14, TP15, TP16. However I cannot see those te… --- ## [Which PCIe controllers are enabled?](https://community.solid-run.com/t/which-pcie-controllers-are-enabled/374)
**Author:** [@elahav](https://community.solid-run.com/u/elahav)\ **Replies:** 10\ **Last updated:** [July 13, 2022, 10:03am UTC](https://community.solid-run.com/t/which-pcie-controllers-are-enabled/374 "2022-07-13T10:03:19Z")
The LX2160 manual and the device tree both refer to 6 controllers. However, mapping and attempting to read the configuration space for each of those causes the board to hang for most controllers, suggesting they are eith… --- ## [Docker support](https://community.solid-run.com/t/docker-support/378)
**Author:** [@rambo1992](https://community.solid-run.com/u/rambo1992)\ **Replies:** 1\ **Last updated:** [July 12, 2022, 7:14am UTC](https://community.solid-run.com/t/docker-support/378 "2022-07-12T07:14:59Z")
Does it have official docker-ce support? Following ubuntu 20.04 guide from docker.com’s leads to following errors. Status: Downloaded newer image for hello-world:latest docker: Error response from daemon: failed to cre… [Previous page](https://community.solid-run.com/c/nxp-lx2160/6.md?page=4) [Next page](https://community.solid-run.com/c/nxp-lx2160/6.md?page=6)