# NXP LX2160 **URL:** https://community.solid-run.com/c/nxp-lx2160/6.md [Latest](https://community.solid-run.com/latest.md) · [Categories](https://community.solid-run.com/categories.md) · [Tags](https://community.solid-run.com/tags.md) --- ## [About the NXP LX2160 category](https://community.solid-run.com/t/about-the-nxp-lx2160-category/21)
**Author:** [@YaelCohenSR](https://community.solid-run.com/u/YaelCohenSR)\ **Replies:** 0\ **Last updated:** [April 12, 2021, 12:05pm UTC](https://community.solid-run.com/t/about-the-nxp-lx2160-category/21 "2021-04-12T12:05:59Z")
SolidRun’s LX2160A Computer-on-Module based on the COM Express type 7 form factor was designed to provide a robust and modular networking computing platform. --- ## [ClearFog LX2162A Kit ClearFog not booting](https://community.solid-run.com/t/clearfog-lx2162a-kit-clearfog-not-booting/1105)
**Author:** [@moehme](https://community.solid-run.com/u/moehme)\ **Replies:** 1\ **Last updated:** [September 7, 2026, 2:17pm UTC](https://community.solid-run.com/t/clearfog-lx2162a-kit-clearfog-not-booting/1105 "2026-09-07T14:17:33Z")
Hello @ all, is there a way to do some kind of hardware reset. The led which seems to show she the status isn´t shinning. I changes the dip switches for booting from sd-card. There is also no output on the serial termi… --- ## [\[Solved\] My ClearFog CX LX2 won't boot (RAM not seated properly)](https://community.solid-run.com/t/solved-my-clearfog-cx-lx2-wont-boot-ram-not-seated-properly/1156)
**Author:** [@PacMan](https://community.solid-run.com/u/PacMan)\ **Replies:** 1\ **Last updated:** [September 7, 2026, 2:11pm UTC](https://community.solid-run.com/t/solved-my-clearfog-cx-lx2-wont-boot-ram-not-seated-properly/1156 "2026-09-07T14:11:48Z")
My LX2160 has been powered off for quite a while (as I have not had the equipment to build images). Edit: it’s board rev 2.1 (and it used to boot back in 2022). Yesterday I attempted to set it up again, writing an up-t… --- ## [LX2162A clearfog SFP+ optical transceivers not working](https://community.solid-run.com/t/lx2162a-clearfog-sfp-optical-transceivers-not-working/681)
**Author:** [@dstepanov](https://community.solid-run.com/u/dstepanov)\ **Replies:** 8\ **Last updated:** [August 27, 2026, 4:22pm UTC](https://community.solid-run.com/t/lx2162a-clearfog-sfp-optical-transceivers-not-working/681 "2026-08-27T16:22:20Z")
Hey! I’m using LX2162A SOM (rev 1.1) + LX2162A Clearfog board (rev.2). So these are the most recent HW revisions for this time. I connected and configured DAC cable to dpmac.5 and dpmac.6 (due to article https://solidr… --- ## [Modern-ish GPUs supported on this board?](https://community.solid-run.com/t/modern-ish-gpus-supported-on-this-board/1155)
**Author:** [@andy.nicholson](https://community.solid-run.com/u/andy.nicholson)\ **Replies:** 0\ **Last updated:** [August 25, 2026, 12:08am UTC](https://community.solid-run.com/t/modern-ish-gpus-supported-on-this-board/1155 "2026-08-25T00:08:55Z")
I’ve been running my machine on an AMD RX570 with the amdgpu driver for a few years now. Has anyone managed to run a more recent Radeon board on theirs? Considering trying to get a 9060 running. --- ## [HoneyComb SATA performance issues](https://community.solid-run.com/t/honeycomb-sata-performance-issues/1103)
**Author:** [@ed.roach](https://community.solid-run.com/u/ed.roach)\ **Replies:** 1\ **Last updated:** [July 17, 2026, 2:00pm UTC](https://community.solid-run.com/t/honeycomb-sata-performance-issues/1103 "2026-07-17T14:00:29Z")
I’ve run into the same issue as this thread on two LX2160A HoneyComb boards, but only specifically on SATA ports SATA0 and SATA2 (U32) — the other two function just fine and reliably. With certain SATA drives, SATA0 is p… --- ## [Management console on LX2162A](https://community.solid-run.com/t/management-console-on-lx2162a/662)
**Author:** [@dstepanov](https://community.solid-run.com/u/dstepanov)\ **Replies:** 3\ **Last updated:** [June 9, 2026, 7:50pm UTC](https://community.solid-run.com/t/management-console-on-lx2162a/662 "2026-06-09T19:50:02Z")
Hello! I’m using ClearFog LX2162A. Is it possible to organize some kind of remote management (at least power on/off and reset of LX2162A SOM) without using external RunBMC module? Due to schematics Clearfog LX2162A con… --- ## [Looking for schematics of particular version of ClearFog CX2 LX2160A Dev Board](https://community.solid-run.com/t/looking-for-schematics-of-particular-version-of-clearfog-cx2-lx2160a-dev-board/1129)
**Author:** [@alning](https://community.solid-run.com/u/alning)\ **Replies:** 1\ **Last updated:** [May 7, 2026, 8:06am UTC](https://community.solid-run.com/t/looking-for-schematics-of-particular-version-of-clearfog-cx2-lx2160a-dev-board/1129 "2026-05-07T08:06:59Z")
Hi, I’d be appreciate if you provide me with schematics corresponding to revision of my deviceClearFog board: COM - LX2160A CEX7 rev.1.7 Carrier - ClearFog ITX rev 1.2 Or just list of changes have been made since tha… --- ## [Upgrade Debian 12 -\> Debian 13 partial failure (kernel 6.12+ won't boot)](https://community.solid-run.com/t/upgrade-debian-12-debian-13-partial-failure-kernel-6-12-wont-boot/1058)
**Author:** [@AreYouLoco](https://community.solid-run.com/u/AreYouLoco)\ **Replies:** 8\ **Last updated:** [May 5, 2026, 2:01pm UTC](https://community.solid-run.com/t/upgrade-debian-12-debian-13-partial-failure-kernel-6-12-wont-boot/1058 "2026-05-05T14:01:37Z")
Hi, I just upgraded system on my lx2k. Was suspecting problems. And while the system upgrade went fine. It wont boot on newer kernels. Stock kernel on Deb12 6.1.0-37-arm64 (Debian 12.11) with iommu workaround is still … --- ## [ClearFog CX2 LX2160A Dev Board - Write to SRKH Registers in RSP using JTAG](https://community.solid-run.com/t/clearfog-cx2-lx2160a-dev-board-write-to-srkh-registers-in-rsp-using-jtag/1115)
**Author:** [@jhammerberg](https://community.solid-run.com/u/jhammerberg)\ **Replies:** 0\ **Last updated:** [March 11, 2026, 5:08pm UTC](https://community.solid-run.com/t/clearfog-cx2-lx2160a-dev-board-write-to-srkh-registers-in-rsp-using-jtag/1115 "2026-03-11T17:08:17Z")
Hello, I’ve been trying to enable and demo secure boot on the ClearFog CX2 Dev Board for the LX2160A. I’ve made a software image with Yocto which I believe has secure boot enabled, although it’s hard to tell given that … --- ## [Issue Booting Yocto Image on NXP LX2160A ClearFog (SolidRun) Board](https://community.solid-run.com/t/issue-booting-yocto-image-on-nxp-lx2160a-clearfog-solidrun-board/1108)
**Author:** [@Suresh\_m](https://community.solid-run.com/u/Suresh_m)\ **Replies:** 1\ **Last updated:** [March 11, 2026, 9:18am UTC](https://community.solid-run.com/t/issue-booting-yocto-image-on-nxp-lx2160a-clearfog-solidrun-board/1108 "2026-03-11T09:18:49Z")
Hi, We are planning to bring up a Yocto image on the NXP LX2160A ClearFog board from SolidRun. We downloaded the default image from the SolidRun website and used the following image: fsl-image-networking-full-lx2160a-… --- ## [Enabling single-DIMM operations in the secondary DIMM slot](https://community.solid-run.com/t/enabling-single-dimm-operations-in-the-secondary-dimm-slot/1068)
**Author:** [@romameie](https://community.solid-run.com/u/romameie)\ **Replies:** 2\ **Last updated:** [March 11, 2026, 9:17am UTC](https://community.solid-run.com/t/enabling-single-dimm-operations-in-the-secondary-dimm-slot/1068 "2026-03-11T09:17:14Z")
I am in possession of a LX2160A CEx7 CoM with a broken primary DIMM slot. Firmware images fail to boot with a DIMM in the secondary DIMM slot, because there is a bug after disabling the first DDR controller in the upstr… --- ## [LX2160A DPDK Example Use Case - Software Packet Distributor](https://community.solid-run.com/t/lx2160a-dpdk-example-use-case-software-packet-distributor/1101)
**Author:** [@MikeChangENGR](https://community.solid-run.com/u/MikeChangENGR)\ **Replies:** 2\ **Last updated:** [February 4, 2026, 12:12pm UTC](https://community.solid-run.com/t/lx2160a-dpdk-example-use-case-software-packet-distributor/1101 "2026-02-04T12:12:39Z")
Hi all, We’re releasing SPD v1.0.5 — a DPDK-based, software-only Ethernet packet distributor that adds a Greedy Reshaper to reduce worker imbalance under elephant-flow skew. What it is • Software-only & portable: no … --- ## [40G over 4xSFP+](https://community.solid-run.com/t/40g-over-4xsfp/1085)
**Author:** [@raphael\_h](https://community.solid-run.com/u/raphael_h)\ **Replies:** 0\ **Last updated:** [December 8, 2025, 5:37pm UTC](https://community.solid-run.com/t/40g-over-4xsfp/1085 "2025-12-08T17:37:03Z")
Hi all, I have multiple honeycomb lx-2s and would like to connect them to 40Gbps QSFP+ ports on a (mikrotik) switch. the wiki states the following: “For SERDES SD1 config 20 which is dual 40G, then dpmac.1 and dpmac.2… --- ## [Pulsating Fans](https://community.solid-run.com/t/pulsating-fans/1075)
**Author:** [@boyceke1](https://community.solid-run.com/u/boyceke1)\ **Replies:** 1\ **Last updated:** [October 16, 2025, 2:27pm UTC](https://community.solid-run.com/t/pulsating-fans/1075 "2025-10-16T14:27:16Z")
I have a Honeycomb LX2 that was previously working. After a number of months on the shelf I plugged it back in and the fans immediately spin up and pulsate precisely 13 times. Is there any indication of what the proble… --- ## [LTC3882 Current Sense](https://community.solid-run.com/t/ltc3882-current-sense/1077)
**Author:** [@sinoue](https://community.solid-run.com/u/sinoue)\ **Replies:** 2\ **Last updated:** [October 6, 2025, 6:08pm UTC](https://community.solid-run.com/t/ltc3882-current-sense/1077 "2025-10-06T18:08:46Z")
Hello, Can we trust the current sense value from the LTC3882? Specifically, is the IOUT\_CAL\_GAIN register configured correctly? I’d like to measure the VDD current and see how it changes with frequency and the number o… --- ## [Binaries showing Exec format error when trying to run](https://community.solid-run.com/t/binaries-showing-exec-format-error-when-trying-to-run/1072)
**Author:** [@NaKel](https://community.solid-run.com/u/NaKel)\ **Replies:** 1\ **Last updated:** [September 23, 2025, 4:09pm UTC](https://community.solid-run.com/t/binaries-showing-exec-format-error-when-trying-to-run/1072 "2025-09-23T16:09:42Z")
Hello team, I have built my own carrier board with Lx2160a solidrun ComE module. I am using the delvelop-ls-5.15.72-2.2.0 branch to build the linux using Docker on a VM. uname -a Linux sync008 6.8.0-78-generic #78~22.0… --- ## [DPDK not working on LX2160A ClearFog](https://community.solid-run.com/t/dpdk-not-working-on-lx2160a-clearfog/1071)
**Author:** [@Vbashamoni](https://community.solid-run.com/u/Vbashamoni)\ **Replies:** 0\ **Last updated:** [September 18, 2025, 5:51pm UTC](https://community.solid-run.com/t/dpdk-not-working-on-lx2160a-clearfog/1071 "2025-09-18T17:51:09Z")
I was able to boot the BSP successfully on Clear-Fog LX2160A board and working on enabling DPDK with the onboard SFP+ ports. I’m able to bind as SFP module to DPDK (via vfio-fsl-mc), but when I attempt to start DPDK test… --- ## [Upstream support](https://community.solid-run.com/t/upstream-support/1070)
**Author:** [@neiljones](https://community.solid-run.com/u/neiljones)\ **Replies:** 0\ **Last updated:** [September 17, 2025, 11:05am UTC](https://community.solid-run.com/t/upstream-support/1070 "2025-09-17T11:05:54Z")
What is the current status of upstream support (both in kernel.org and Ubuntu kernels) for LX2160A and the Clearfog / HoneyComb systems. Are all drivers now fully upstream ? Last time I used these system a few years bac… --- ## [How to install NVIDIA Graphic Card on LX2160A](https://community.solid-run.com/t/how-to-install-nvidia-graphic-card-on-lx2160a/366)
**Author:** [@vader](https://community.solid-run.com/u/vader)\ **Replies:** 22\ **Last updated:** [September 7, 2025, 5:03pm UTC](https://community.solid-run.com/t/how-to-install-nvidia-graphic-card-on-lx2160a/366 "2025-09-07T17:03:56Z")
I want to install GPU on LX2160A to train AI data,but I don’t know how to install a NVIDIA GPU on LX2160A. Pls someone could tell me how to operate with it? --- ## [Honeycomb LX2 Hot plug support](https://community.solid-run.com/t/honeycomb-lx2-hot-plug-support/1061)
**Author:** [@Hieudon](https://community.solid-run.com/u/Hieudon)\ **Replies:** 1\ **Last updated:** [August 25, 2025, 10:52am UTC](https://community.solid-run.com/t/honeycomb-lx2-hot-plug-support/1061 "2025-08-25T10:52:10Z")
Hi everyone, I’m working with the Honeycomb LX2 system and wanted to confirm whether PCIe hot-plug is actually supported. The PCI capabilities module reports that hotplug capability is present, but I’ve seen errata for … --- ## [❗ Build Failure: BL2\_BASE – "invalid suffix 'x' on integer constant"](https://community.solid-run.com/t/build-failure-bl2-base-invalid-suffix-x-on-integer-constant/1029)
**Author:** [@vaidic](https://community.solid-run.com/u/vaidic)\ **Replies:** 1\ **Last updated:** [July 26, 2025, 7:29pm UTC](https://community.solid-run.com/t/build-failure-bl2-base-invalid-suffix-x-on-integer-constant/1029 "2025-07-26T19:29:33Z")
I’m working on building the img for the LX2162A Clearfog board using the lx2160a\_build setup. https://github.com/SolidRun/lx2160a\_build/blob/develop-lsdk-21.08/README.md I’ve set the TARGET as LX2162A\_SOM\_CLEARFOG\_18\_9… --- ## [HoneyComb LX2160A - DPDK not working](https://community.solid-run.com/t/honeycomb-lx2160a-dpdk-not-working/1038)
**Author:** [@Rafal](https://community.solid-run.com/u/Rafal)\ **Replies:** 0\ **Last updated:** [July 16, 2025, 12:04pm UTC](https://community.solid-run.com/t/honeycomb-lx2160a-dpdk-not-working/1038 "2025-07-16T12:04:06Z")
Hello, I have a problem with making DPDK working on HoneyComb LX2160A platform. I have dpmac.10/dpni.4 connected with fiber to the external switch. When dpni is in linux everything is ok. The link status on switch is u… --- ## [Fd.io VPP on LX2160?](https://community.solid-run.com/t/fd-io-vpp-on-lx2160/549)
**Author:** [@agv100](https://community.solid-run.com/u/agv100)\ **Replies:** 3\ **Last updated:** [July 6, 2025, 3:09pm UTC](https://community.solid-run.com/t/fd-io-vpp-on-lx2160/549 "2025-07-06T15:09:12Z")
Dear SolidRun community members, Does anybody have any experience or attempts to run fd.io VPP dataplane on LX2160 platform? I already have some attempts to do that, with unsatisfactory results. The performance was qui… --- ## [SoliRun HoneyComb LX2K(LX2160A) suspend to RAM feature](https://community.solid-run.com/t/solirun-honeycomb-lx2k-lx2160a-suspend-to-ram-feature/1034)
**Author:** [@yzhuang](https://community.solid-run.com/u/yzhuang)\ **Replies:** 0\ **Last updated:** [July 2, 2025, 8:06pm UTC](https://community.solid-run.com/t/solirun-honeycomb-lx2k-lx2160a-suspend-to-ram-feature/1034 "2025-07-02T20:06:46Z")
We are trying to enable some powermanagement features on QNX with honeycomb LX2K(LX2160A) platform. Some researches from our side shows this feature is not even supported on linux. We would like to confirm whether it is … --- ## [Issue Using 10GTek ASF-GE-T SFP Module – Interface Fails to Initialize](https://community.solid-run.com/t/issue-using-10gtek-asf-ge-t-sfp-module-interface-fails-to-initialize/1026)
**Author:** [@Mariusmm](https://community.solid-run.com/u/Mariusmm)\ **Replies:** 0\ **Last updated:** [June 11, 2025, 11:03am UTC](https://community.solid-run.com/t/issue-using-10gtek-asf-ge-t-sfp-module-interface-fails-to-initialize/1026 "2025-06-11T11:03:29Z")
Hello, We are experiencing issues when attempting to use a 10GTek ASF-GE-T SFP module. The steps and results are as follows: We execute the command: \> sudo ls-addni dpmac.8 This completes without any error messages. … --- ## [OpenWrt for LX2160A-CEX7 rev2.1](https://community.solid-run.com/t/openwrt-for-lx2160a-cex7-rev2-1/1019)
**Author:** [@chipset](https://community.solid-run.com/u/chipset)\ **Replies:** 0\ **Last updated:** [May 23, 2025, 2:59pm UTC](https://community.solid-run.com/t/openwrt-for-lx2160a-cex7-rev2-1/1019 "2025-05-23T14:59:55Z")
Hello everyone, can you tell me how to build openwrt for OpenWRT for LX2160A-CX7 rev 2.1 ClearFog? I tried to build using the standard configurator. OpenWrt Firmware Selector . But nothing is loading, trying to boot thro… --- ## [I want to install a fanless heatsink, but I’m having a hard time to find out the correct form factor from the specs of the one used in your board](https://community.solid-run.com/t/i-want-to-install-a-fanless-heatsink-but-i-m-having-a-hard-time-to-find-out-the-correct-form-factor-from-the-specs-of-the-one-used-in-your-board/86)
**Author:** [@DanielGabbard](https://community.solid-run.com/u/DanielGabbard)\ **Replies:** 24\ **Last updated:** [May 5, 2025, 5:20am UTC](https://community.solid-run.com/t/i-want-to-install-a-fanless-heatsink-but-i-m-having-a-hard-time-to-find-out-the-correct-form-factor-from-the-specs-of-the-one-used-in-your-board/86 "2025-05-05T05:20:56Z")
Hi, I want to install a fanless heatsink, but I’m having a hard time to find out the correct form factor from the specs of the one used in your board. Who should I talk to about this at Solid Run? Thanks, Daniel --- ## [ClearFog LX2162A 1G Ethernet not working](https://community.solid-run.com/t/clearfog-lx2162a-1g-ethernet-not-working/978)
**Author:** [@Pavel](https://community.solid-run.com/u/Pavel)\ **Replies:** 13\ **Last updated:** [May 8, 2025, 9:35am UTC](https://community.solid-run.com/t/clearfog-lx2162a-1g-ethernet-not-working/978 "2025-05-08T09:35:44Z")
Hi, I have followed the instructions here to bring up my ClearFog LX2162A board https://solidrun.atlassian.net/wiki/spaces/developer/pages/199131187/ClearFog+LX2162A+Quick+Start+Guide, and flashed the pre-built image on… --- ## [In-place updates: kernel, firmware etc](https://community.solid-run.com/t/in-place-updates-kernel-firmware-etc/200)
**Author:** [@alex9373](https://community.solid-run.com/u/alex9373)\ **Replies:** 6\ **Last updated:** [May 5, 2025, 4:24am UTC](https://community.solid-run.com/t/in-place-updates-kernel-firmware-etc/200 "2025-05-05T04:24:26Z")
Hi In Honeycomb with the Ubuntu supplied from the built images, I’m free to update the userland (have updated to Ubuntu 21.10, and plan to update to 22.04 LTS next year). SFP+ - What am I looking for? - #5 by jnettlet … [Next page](https://community.solid-run.com/c/nxp-lx2160/6.md?page=1)