# I.MX6

**URL:** https://community.solid-run.com/c/i-mx6/8.md?page=1

[Latest](https://community.solid-run.com/latest.md) · [Categories](https://community.solid-run.com/categories.md) · [Tags](https://community.solid-run.com/tags.md)

**Page:** 2

---

## [How to determine eFuse settings on previously used iMX6 SOM](https://community.solid-run.com/t/how-to-determine-efuse-settings-on-previously-used-imx6-som/230)

<div class="topic-metadata">

**Author:** [@rayk](https://community.solid-run.com/u/rayk)\
**Replies:** 1\
**Last updated:** [January 28, 2022, 6:16am UTC](https://community.solid-run.com/t/how-to-determine-efuse-settings-on-previously-used-imx6-som/230 "2022-01-28T06:16:11Z")

</div>

I recently acquired a couple of used HummingBoard 2 devices (a Gate Rev 1.2 no eMMC and an Edge Rev 1.2 w/ 4GB eMMC). These came with 3 different SOM Modules i2EX-3C sticker on bottom. IMX6-uSOM 1.3 silkscreened on…

---

## [Debian Jessie fails for CuBox](https://community.solid-run.com/t/debian-jessie-fails-for-cubox/215)

<div class="topic-metadata">

**Author:** [@peterskurt](https://community.solid-run.com/u/peterskurt)\
**Replies:** 0\
**Last updated:** [January 10, 2022, 8:54pm UTC](https://community.solid-run.com/t/debian-jessie-fails-for-cubox/215 "2022-01-10T20:54:30Z")

</div>

I have been trying to apt update to the latest updates and I get this error. Any thoughts on how to fix, likely by updating certs? Note: I removed the H-t-t-p-s from the below because it thinks I’m putting links in this …

---

## [Root password reset](https://community.solid-run.com/t/root-password-reset/211)

<div class="topic-metadata">

**Author:** [@insaneelmer](https://community.solid-run.com/u/insaneelmer)\
**Replies:** 8\
**Last updated:** [January 4, 2022, 1:21pm UTC](https://community.solid-run.com/t/root-password-reset/211 "2022-01-04T13:21:52Z")

</div>

Hi, I haven’t used my device for some time and I need to change the password for the root user. I was hoping that I could add some boot arguments but apparently, it didn’t work, and don’t know U-Boot well enough to fix …

---

## [Cubox / HummingBoard iMX6 : How to upgrade Debian?](https://community.solid-run.com/t/cubox-hummingboard-imx6-how-to-upgrade-debian/202)

<div class="topic-metadata">

**Author:** [@bc-109](https://community.solid-run.com/u/bc-109)\
**Replies:** 1\
**Last updated:** [December 10, 2021, 1:13pm UTC](https://community.solid-run.com/t/cubox-hummingboard-imx6-how-to-upgrade-debian/202 "2021-12-10T13:13:36Z")

</div>

Hi all, I have iMX6 Cubox and Hummingboards, running very old Debian 8. I didn’t attempt any upgrade, because it breaks kernel, and the board does not boot anymore. The process I wrote years ago to compile and install a…

---

## [i.MX6DL after POR\_B fail boot and Wi-Fi not work](https://community.solid-run.com/t/i-mx6dl-after-por-b-fail-boot-and-wi-fi-not-work/169)

<div class="topic-metadata">

**Author:** [@Enya](https://community.solid-run.com/u/Enya)\
**Replies:** 9\
**Last updated:** [October 18, 2021, 5:44am UTC](https://community.solid-run.com/t/i-mx6dl-after-por-b-fail-boot-and-wi-fi-not-work/169 "2021-10-18T05:44:47Z")

</div>

Hello, We have problems with i.MX6 SOM rev 1.5 after POR reset condition driving by POR\_B pin, on our custom board (push-pull and open drain tested) and hummingboard rev 3.5 (U1 switch) . Configuration info i.MX6DL …

---

## [PCF8523 RTC chip not initialize by kernel](https://community.solid-run.com/t/pcf8523-rtc-chip-not-initialize-by-kernel/178)

<div class="topic-metadata">

**Author:** [@Enya](https://community.solid-run.com/u/Enya)\
**Replies:** 1\
**Last updated:** [October 9, 2021, 3:46am UTC](https://community.solid-run.com/t/pcf8523-rtc-chip-not-initialize-by-kernel/178 "2021-10-09T03:46:46Z")

</div>

Hello, On our product, the VBAT pin of the PCF8523 chip is under limit voltage when delivering the goods to the end user (rechargeable system). On first boot, the kernel returns an invalid parameter value and cannot upd…

---

## [What is the typical pipeline to setup C/C++ development environment on cuBox](https://community.solid-run.com/t/what-is-the-typical-pipeline-to-setup-c-c-development-environment-on-cubox/147)

<div class="topic-metadata">

**Author:** [@appleTree](https://community.solid-run.com/u/appleTree)\
**Replies:** 3\
**Last updated:** [August 26, 2021, 4:40am UTC](https://community.solid-run.com/t/what-is-the-typical-pipeline-to-setup-c-c-development-environment-on-cubox/147 "2021-08-26T04:40:19Z")

</div>

Hi All, We just bought some I4P-300-D cuBox machines for developing our applications, and successfully installed the Buster image on it. Typically there are two options to set the development environment: (1) host-ta…

---

## [Cubox-i4pro No Boot](https://community.solid-run.com/t/cubox-i4pro-no-boot/143)

<div class="topic-metadata">

**Author:** [@Goldman](https://community.solid-run.com/u/Goldman)\
**Replies:** 3\
**Last updated:** [August 19, 2021, 5:01am UTC](https://community.solid-run.com/t/cubox-i4pro-no-boot/143 "2021-08-19T05:01:46Z")

</div>

A few days ago, my device Cubox-i4pro started to reboot spontaneously. I tried reinstalling the operating system Debian 10 Buster (cli) on the microsd card, but it doesn’t help. I tried to use different microsd’s with no…

---

## [New to the Cubox](https://community.solid-run.com/t/new-to-the-cubox/125)

<div class="topic-metadata">

**Author:** [@The5thSurvivor](https://community.solid-run.com/u/The5thSurvivor)\
**Replies:** 4\
**Last updated:** [August 16, 2021, 4:32am UTC](https://community.solid-run.com/t/new-to-the-cubox/125 "2021-08-16T04:32:06Z")

</div>

Hello. I just recently purchased two Cubox i4P 300-D PCs. As soon as I saw them, I had to get some. I was looking at some videos on YouTube and searched various articles online about how you could run Ubuntu and Android …

---

## [i.MX6 Dual Lite fails to resume from suspend-to-ram mode](https://community.solid-run.com/t/i-mx6-dual-lite-fails-to-resume-from-suspend-to-ram-mode/48)

<div class="topic-metadata">

**Author:** [@Frank](https://community.solid-run.com/u/Frank)\
**Replies:** 4\
**Last updated:** [August 14, 2021, 4:30am UTC](https://community.solid-run.com/t/i-mx6-dual-lite-fails-to-resume-from-suspend-to-ram-mode/48 "2021-08-14T04:30:24Z")

</div>

Hello, I am encountering issues using iMX6, mounted on a SRMX6DLW00D01GE008V15IF module from SolidRun. This module is then mounted on a custom board. Randomly, the i.MX won’t wake up well from a suspend-to-ram mode. It…

[Previous page](https://community.solid-run.com/c/i-mx6/8.md)
